Programming a movement to a position without stop. Schneider Electric Software PLC Application-Specific Functions, Axis control, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLC Application-specific functions - Axis control

Programming

Programming a movement to a position without stop

Instruction The movement to position without stop instruction is as follows:

Instruction

Movement to position without stop

Instruction code

01

Icon

Example SMOVE %CH102.0 (1,90,01,5000000,1000,0)

Speed (mm / min)

1000

0

5000000

Position (microm)

Note: If instruction G01 is not followed by another instruction, its behavior depends on the Sequence control parameter defined in configuration.

TLX DS 57 PL7 xxE

127