Programming interpolation
Instruction codes for XMOVE function
Introduction
Instruction codes list
The G parameter defines the instruction code.
To choose the instruction code, either use the scroll button on the right of the G field, or press on the icon which corresponds to the movement. You can also enter the code directly with a "direct entry" (without going via the Details screen).
The instruction codes which can be chosen from the Details screen are as follows:
Instruction code
09
Indication
Movement on position with stop
Icon
01
10
05
92
Movement on position without stop
Movement until event with stop
Await event
Initializing the PREF1 registers for X, Y and Z axes
TLX DS 57 PL7 xx
289
Programming interpolation
Imaging on
Details screen
The Details screen also displays an image which represents the selected movement.
For example, code G09 :
290
TLX DS 57 PL7 xx
