Forced reference point command. Schneider Electric Software PLC Application-Specific Functions, Axis control, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLC Application-specific functions - Axis control
Below you will find brief information for Axis Control PL7 Junior/Pro. This user guide provides information on axis control tasks for Premium PLCs using PL7 software. It covers the setup, programming, adjustment, and debugging of axis control modules, including independent and interpolated axes. The guide also provides information on related documentation, general compatibility, and introductory examples to aid in implementation.
Advertisement
Advertisement
Advertisement
Key features
Independent axis control
Interpolated axis control
SMOVE/XMOVE Function support
Configuration parameters adjustment
Debugging tools
Manual and automatic modes
Frequently asked questions
The TSX CAY modules are used to control the movement of independent and interpolated axes in Premium PLCs.
The axis control modules are programmed using PL7 Pro or PL7 Junior software.
The axis control modules can control independent axes, interpolated axes, and master/slave configurations.
The axis control modules support both incremental and absolute encoders.
The SMOVE function is used to program movements for each independent axis, while the XMOVE function is used for interpolated axis movements.