Programming a movement to position with stop. Schneider Electric Software PLC Application-Specific Functions, Axis control, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLC Application-specific functions - Axis control

Programming

Programming a movement to position with stop

Instruction The movement to position with stop instruction is as follows :

Instruction

Movement to position with stop

Instruction code

09

Icon

Example SMOVE %CH102.0 (1,90,09,5000000,1000,0)

Speed (mm / min)

1000

0

5000000

Position (microm)

128

TLX DS 57 PL7 xxE