Axis type. Schneider Electric Software PLC Application-Specific Functions, Axis control, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLC Application-specific functions - Axis control

Configuration

Axis type

Introduction

Machine type

The Machine zone is only displayed with a TSX CAY •2 or TSX CAY 33 module. It is used to choose the type of axis to be managed by the channel.

Two selection buttons are used to choose your machine type:

Parameter

Limited

Infinite

Description

For a limited machine, the position measurement advances between two values defined by soft stops

For an infinite machine, the position measurement advances between the values 0 and Modulo.

78

TLX DS 57 PL7 xxE