Configuration
Event input
Introduction
Storage of position
The Event input selection zone is used to: l define the type of event to be detected on the event input of the channel , for G05,
G07, G10 and G11 instructions. l define the type of event used for the storage of position function, which can store one or two positions (PREF1 and PREF2).
If the application does not require a length measurement, the storage possibilities are as follows:
Storage possibilities
Standard rising edge and PREF1 processing
Storage
PREF1
Icon
(1)
Falling Edge and PREF1 PREF1 (1)
If the application requires a length measurement, the storage possibilities are as follows:
Storage possibilities
Rising edge and PREF1, then rising edge and
PREF2
Storage
PREF1, PREF2
Icon
(1)
Rising edge and PREF1, then falling edge and
PREF2
PREF1, PREF2 (1)
Falling edge and PREF1, then falling edge and
PREF2
PREF1, PREF2 (1)
98
TLX DS 57 PL7 xxE
Storage possibilities
Falling edge and PREF1, then rising edge and
PREF2
Storage
PREF1, PREF2
Configuration
Icon
(1)
(1) The icon shows when storage occurs. For example,
The position PREF1 is detected on the first rising edge of the event input and the position PREF2 is detected on the second rising edge of the event input.
TLX DS 57 PL7 xxE
99
