Debugging an independent axis control program
7
Introduction
Subject of this section
What’s in this
Chapter?
This section describes the axis control channel debugging functions, in the different modes: Measurement, Manual, Loop control disabled, Automatic. It also describes the diagnostics screen which gives access to possible faults.
This Chapter contains the following Maps:
Topic
Debugging principles
The debug screen user interface
Description of debug screens
Measurement Mode (Off)
Loop control disabled mode (Dir Drive)
Manual mode (Manu)
Automatic mode (Auto)
Channel diagnostics
Archiving and documentation
Page
222
223
225
227
229
232
236
240
241
221
TLX DS 57 PL7xx
