Debugging
Channel diagnostics
Introduction The various debugging, adjustment and configuring screens offer a DIAG button in online mode, which gives access to details of faults detected by the module.
Internal faults
Channel diagnostics
External faults Other fault
Translator fault
Absolute encoder frame fault
Emergency stop fault
24V power supply fault
Overspeed fault
Commands refused
Configuration
Adjustment:
Command: 0x1 AUTO command error (parameters)
OK
Description of the different fields
The Channel diagnostics screen offers the following fields:
Field
Internal faults
External faults
Other faults
Command refused
Description
Internal faults within the module which generally require it to be replaced
Faults originating from the operating part
Application faults
Indicates the cause and the message number of command refused (See
CMD_FLT code error list, p. 266 )
240
TLX DS 57 PL7xx
