Integration description. Mitel 8500

Requirements

The steps to set up the UNIVERGE SV7000 with OAI integration require the following:

Phone System

●

A UNIVERGE SV7000 phone system.

●

A network connection to the voice mail server.

●

One or more of the following station ports set up as voice messaging ports:

Port type Description

Analog

T1

One analog station port for each voice messaging port.

One digital line interface card for each group of

24 voice messaging ports.

Digital One digital station port for each voice messaging port.

IP Terminal One IP Terminal port for each voice messaging port (TEC12).

IP-VPS One IP-VPS port for each voice messaging port

(TEC26).

UNIVERGE UM8500 server

●

A network connection with the phone system. A second network card on the messaging system server to connect directly to the phone system is recommended.

●

The Dialogic voice boards installed; see the Installation Guide for installation details.

NOTE

●

●

For the latest information on supported voice boards for UM8500, contact a sales representative.

No voice boards are required if IP-VPS or IP Terminal ports are used.

●

UM8500 installed and ready for the integration as described in the

Installation Guide.

●

OAI Integration server installed.

●

A system key that enables the integration and the appropriate number of voice messaging ports.

NEC UNIVERGE SV7000

WITH

OAI 199