PMC-5151 User Manual

ICP DAS PMC-5151 User Manual

7.2 XW-Board Setting

XW-Board Setting page allows the user to set up the configuration of the 5

XW-Boards (XW107, XW110, XW304, XW310 and XW310C) that are connected to the PMC-5151. The XW-Board Setting page is shown as follow:

Please note: Each time PMC-5151 is allowed to connect to one XW-Board module only.

Figure7-18 : XW-Board Setting Page

Select the XW-Board that are connected to the PMC-5151 from the drop down list and click “Setting”, a window for setting up the parameters of

XW-Board and its I/O channel will appear. The setting for the module is shown as below:

 Nickname: For user to define a nickname for the module, this nickname will be displayed on the “I/O Information” and “Rule

Setting” pages.

 Description: The Description field provides a space for the user to make a brief description of this XW-Board.

The following section will introduce the DI, DO, AI and AO channel settings of the XW-Board. After all settings are completed, click “Save” button to save the changes.

7.2.1 XW-Board DI Channel Settings

The XW-Board DI Channel Setting page is shown as follow (using

XW107 as an example):

83