PMC-5151 User Manual

ICP DAS PMC-5151 User Manual

Figure7-36 : Add the Modbus RTU Power Meter mannually

7.3.4 I/O Module List Interface

After the Modbus RTU I/O module or Modbus TCP I/O module are added to the I/O Module list via auto scan or manual work, the Modbus

RTU I/O modules and Modbus TCP I/O modules will be listed as below:

Figure7-37 : Modbus module List Interface

The following functions allow to perform settings or rearrange order of the Modbus I/O modules. Please select the Modbus I/O module and click on the function button to perform the operations:

 Setting: Click the radio button in front of the Modbus I/O module and click on “Setting” to get into the setting page of the

Modbus I/O module. The settings for each Modbus I/O module will be given in the following section.

 Move Up: Click the radio button in front of the Modbus I/O module and click on “Move Up” to move the Modbus I/O module to upper order (upper index number (No)).

 Move Down: Click the radio button in front of the Modbus I/O module and click on “Move Down” to move the Modbus I/O module to lower order (lower index number (No)).

 Copy: To copy the settings of a pre-set Modbus I/O module to the new Modbus I/O module, please click the radio button in