Setting list of callers . AGFEO AC 14 WebPhonie

Setting list of callers

The telecommunications systems saves external calls which no internal subscriber has answered in a list (call list). You can display and print the list with the “TK-Phone” program on the PC. The “TK-

Phone” program is part of the TK-Soft software package.

1. Interrogate selection:

- Off – no list of callers is saved for this connection.

- Phone number – All external calls are saved for this connection.

- Phonebook – Only those external calls which transmit the phone number and are listed in the telecommunication system’s phonebook are saved for this connection.

2. Specify to whom the selection should apply:

-

I

nternal subscriber (eg 11)

-

A

ll internal subscribers

As-delivered state: Off – no list

The call list contains the following information:

- date and time of the call

- phone number/name of the caller (if the phone number is not transmitted, the caller’s phone number is marked “unknown”)

- multiple subscriber number of the internal subscriber

- service (telephony, fax, data)

The green LED of the telecommunications system flashes rapidly when an entry is saved in the list.

The LED stops flashing rapidly when the list has been read out with “TK-Phone”.

Start programming mode: h

*PRO

PRO

(system PIN) q

ª h * L I S

A

R

T

Off

Phone number

Phonebook

I z

Internal phone number

A

A

ll internal phone numbers q ª

Lift handset

LIS

t of callers

(call list)

Selection Selection:

Enter internal ID and internal phone number or

A

ll internal phone numbers

Acknowledgement tone

Replace handset

P

Continue programming or exit programming mode: h

*END q

ª

END

Programming P - 13