COPYING A LARGE NUMBER OF ORIGINALS AT ONCE (Job Build). Sharp MX-2700G, MX-3500N, MX-3501N, MX2700N, MX3501N, MX3500N, MX-4501N, MX-2700N Guide, MX-2300N, MX2300N

COPYING A LARGE NUMBER OF

ORIGINALS AT ONCE (Job Build)

When copying a very large number of originals, this function allows you to divide the originals into sets and feed each set through the automatic document feeder one set at a time.

Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the maximum number that can be inserted.

This function is convenient when you wish to sort copies of a large number of originals into multiple sets because all originals are copied as a single job, which saves you the trouble of sorting the copies that would be required if the originals were divided into separate copy jobs.

When scanning the original in sets, divide the sheets so that no set has more than the number of paper that can be loaded and then scan from the set with the first page. The settings that you select for the first set can be used for all remaining sets.

Sorting the copies of a large number of originals into 2 sets

Originals

Originals are scanned in separate sets

1

1

1

1

101

1

2

Indicator line

Place the originals face up in the document feeder tray with the edges aligned evenly.

Place the originals face up. Insert the originals all the way into the document feeder tray. The stack must not be higher than the indicator line.

Ready to scan for copy.

Full Colour

Colour Mode

Job Detail

Settings

Auto

Exposure

100%

Copy Ratio

1.

2.

3.

4.

A4

A4R

B4

A3

Original A4

Plain

A4

2-Sided Copy

Output

0

Special Modes

File

Quick File

Touch the [Special Modes] key.

3

Special Modes

Margin Shift

Pamphlet Copy

Erase

Job

Build

(1)

Dual Page

Copy

Tandem

Copy

OK

1/4

(2)

Select Job Build.

(1) Touch the [Job Build] key so that it is highlighted.

(2) Touch the [OK] key.

You will return to the base screen of copy mode.

69

4 or (

Press the [COLOUR START] key

) or the [BLACK & WHITE

START] key ( ) to scan the first set of originals.

Scanning begins.

To cancel scanning...

Press the [STOP] key ( ).

5

6

To cancel scanning...

Press the [STOP] key ( ).

Place next original. Press [Start].

When finished, press [Read-End].

Read-End

To cancel copying...

Press the [STOP] key ( ).

or

Insert the next set of originals and press the [COLOUR START] key ( ) or the [BLACK & WHITE START] key ( ).

You must use the same [START] key that you used to scan the first set of originals to scan each of the remaining sets.

Repeat this step until all originals have been scanned.

Touch the [Read-End] key.

If the Quick File Folder of the document filing function is full, copying in job build mode will be affected. Delete unneeded files from the Quick File Folder.

To cancel the job build setting....

Touch the [Job Build] key in the screen of step 3 so that it is not highlighted.

70