ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust). Sharp MX-2700G, MX-3500N, MX-3501N, MX2700N, MX3501N, MX3500N, MX-4501N, MX-2700N Guide, MX-2300N, MX2300N

ADJUSTING RED/GREEN/BLUE IN COPIES

(RGB Adjust)

This feature is used to strengthen or weaken any one of the three colour components R (red), G (green), or B (blue).

For an image adjustment example, see "Adjusting red/green/blue in copies (RGB Adjust)" in the Quick Start Guide.

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

1

2

Ready to scan for copy.

Full Colour

Colour Mode

Job Detail

Settings

Auto

Exposure

100%

Copy Ratio

1.

2.

3.

4.

A4

A4R

B4

A3

Original A4

Plain

A4

2-Sided Copy

Output

0

Special Modes

File

Quick File

Touch the [Special Modes] key.

3

Special Modes

Stamp

Quick File

Image Edit

File

Colour

Adjustments

Proof Copy

OK

3/4

(2) (1)

Select Colour Adjustments.

(1) Touch the the screens.

keys to switch through

(2) Touch the [Colour Adjustments] key.

Touch the [RGB Adjust] key.

4

Colour

Adjustments

RGB Adjust Sharpness

Colour Balance Brightness

Suppress

Background

Intensity

OK

139

5

6

Colour

Adjustments

RGB Adjust

Only one colour can be adjusted.

R(Red) G(Green) B(Blue)

(1)

Cancel

OK

OK

(2) (3)

Adjust red, green, or blue.

(1) Touch the key of the colour that you wish to adjust: [R (Red)], [G (Green)], or [B (Blue)].

Only one colour can be adjusted. (If you adjust one colour and then adjust another colour, the adjustment of the first colour is cancelled.)

(2) Adjust the selected colour.

Touch the [+] key to strengthen the selected colour, or touch the [-] key to weaken the colour.

(3) Touch the [OK] key.

When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode.

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

(

Press the [COLOUR START] key

).

Copying will begin.

• If the originals were placed in the document feeder tray, the originals are copied.

• If you are using the document glass, copy each page one page at a time.

To cancel the RGB adjust setting...

Touch the [Cancel] key in the screen of step 5.

140