WHITENING FAINT COLOURS IN COPIES
(Suppress Background)
This feature is used to suppress light background areas.
Level [+]
The lightness level at which suppression takes place can be adjusted.
Light areas are suppressed.
Level [-]
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
2
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
Settings
Auto
Exposure
100%
Copy Ratio
1.
2.
3.
4.
A4
A4R
B4
A3
Original A4
Plain
A4
2-Sided Copy
Output
0
Special Modes
File
Quick File
Touch the [Special Modes] key.
3
Special Modes
Stamp
Quick File
Image Edit
File
Colour
Adjustments
Proof Copy
OK
3/4
(2) (1)
Select Colour Adjustments.
(1) Touch the the screens.
keys to switch through
(2) Touch the [Colour Adjustments] key.
Touch the [Suppress Background] key.
4
Colour
Adjustments
RGB Adjust Sharpness
Colour Balance Brightness
Suppress
Background
Intensity
OK
143
5
6
(2)
Colour
Adjustments
OK
Suppress Background
Cancel
Light areas of the original may be suppressed as background.
OK
(1)
Select suppress background settings.
(1) Adjust the background suppression level.
To strengthen the background suppression level
(suppress darker backgrounds), touch the [-] key. To weaken the level (suppress only light backgrounds), touch the [+] key.
(2) Touch the [OK] key.
When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
(
Press the [COLOUR START] key
).
Copying will begin.
• If the originals were placed in the document feeder tray, the originals are copied.
• If you are using the document glass, copy each page one page at a time.
To cancel the suppress background settings...
Touch the [Cancel] key in the screen of step 5.
144