COPYING A3 (11" x 17") SIZE ORIGINAL WITHOUT CUTTING OFF THE EDGES (A3 (11x17) Full Bleed). Sharp MX-2700G, MX-3500N, MX-3501N, MX2700N, MX3501N, MX3500N, MX-4501N, MX-2700N Guide, MX-2300N, MX2300N

COPYING A3 (11" x 17") SIZE ORIGINAL

WITHOUT CUTTING OFF THE EDGES

(A3 (11x17) Full Bleed)

This feature lets you copy an entire A3 (11" x 17") size original at full size with no image cut-off at the edges.

A3W (12" x 18") size is used, which is slightly larger than A3 (11" x 17") size.

A3 (12" x 18") full bleed copy A3 (11" x 17") size original

Place the original face down on the document glass.

1

2

Ready to scan for copy.

Full Colour

Colour Mode

Job Detail

Settings

Auto

Exposure

100%

Copy Ratio

1.

2.

3.

4.

A4

A4R

B4

A3

Original A3

Plain

A4

2-Sided Copy

Output

0

Special Modes

File

Quick File

Touch the [Special Modes] key.

3

Special Modes

Stamp

Quick File

(2)

Image Edit

File

Colour

Adjustments

Proof Copy

OK

3/4

(1)

Select Image Edit.

(1) Touch the the screens.

keys to switch through

(2) Touch the [Image Edit] key.

4

Image Edit

Photo Repeat

A3

Full Bleed

Multi-Page

Enlargement

Centring

(1)

Mirror

Image

B/W

Reverse

OK

(2)

Select A3 Full Bleed (11x17 Full Bleed).

(1) Touch the [A3 Full Bleed] key ([11x17 Full

Bleed] key) so that it is highlighted.

(2) Touch the [OK] key.

When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode.

132

5

Place A3W (12" x 18") paper in the bypass tray.

Pull out the extension tray, adjust the guides to the width of

A3W (12" x 18") paper, and place the paper in the bypass tray.

6

7

Full Colour

Colour Mode

Job Detail

Settings

Auto

Exposure

100%

Copy Ratio

Auto

Original

(1)

A3W

Paper Select

Special Modes

Plain

A3W

2-Sided Copy

Output

Special Modes

File

Quick File

(2)

Open the paper settings screen.

(1) Touch the [Job Detail Settings] key.

(2) Touch the [Paper Select] key.

Paper Select

A4

A4R

B4

A3

Plain

Plain

Plain

Plain

A3W

Plain

(1)

OK

(3)

Select settings for A3W (12" x 18") paper.

(1) Touch the appropriate paper type key.

Touch the key that shows the type of A3W (12" x 18") paper you loaded.

Bypass Tray Type/Size Setting

Select the paper type.

Cancel

1/2

Plain

Pre-Printed

Recycled

Letter Head

Pre-Punched

Colour

Thin Paper

Heavy Paper

Labels

Transparency

Tab Paper

Envelope

1/2

(2) Touch the [OK] key.

Bypass Tray Type/Size Setting

Type

Plain

Auto-Inch

Auto-AB

Custom Size

Type

Size

12x18,11x17,8 x14

8 x11,8 x11R,5 x8 R

7 x10 R,A3,A4,B4,B5

A3W,A3,A4,A4R,A5R,B4

B5,B5R,216x330(8 x13)

11x17,8 x11

X420 Y297

8K

OK

16K

16KR

2/2

(3) Touch the [OK] key.

When the [OK] key is touched, you will return to the job detail setting screen. Touch the [Job Detail Settings] key to return to the base screen of copy mode.

133

8 or

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

(

Press the [COLOUR START] key

) or the [BLACK & WHITE

START] key ( ).

Copying of the original on the document glass begins.

If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals.

• This function can be used when a right tray, a finisher, or a saddle stitch finisher is installed.

• The copy ratio is 100% when this function is used. The ratio cannot be changed.

• Automatic 2-sided copying is not possible.

• The punch function cannot be used.

• The original must be placed on the document glass.

To cancel A3 Full Bleed (11x17 Full Bleed)...

Touch the [A3 Full Bleed] key ([11x17 Full Bleed] key) in the screen of step 4 so that it is not highlighted.

134