Setting Up a Canon or Windows Printer. Canon Studio Solution

Setting Up: Your Network ii. Select Delete to delete a sheet-size. iii. Select Reset List to set the list to printer defaults. d. Margin Text: i. Select Control options for if and when to print margin text. ii. Enter text to appear on lines 1 and 2 at left, center, and right justification. iii. Select Insert Special Text to enter pre-made text for customers, dates, packages, and other information. iv. Select Restore Default Text to set the text to printer defaults.

5. Select OK to save printer settings.

Setting Up a Canon or Windows Printer

The steps for adding a Canon and Windows printer are the same, except some Canon printers will be automatically detected and added to the list.

To add and set up a Canon or Windows printer:

1. Attach the printer to the computer.

2. The printer will be automatically detected and added to the Canon or Windows

Printers list. If your printer is not automatically detected, select [Add Printer using

standard Windows Driver] and select your printer from the list.

3. Select [Setup] to the right of the printer. A window appears.

4. Select Properties to set up basic Windows printing preferences.

5. Select Advanced to set advanced options: a. Media & Profile: i. Select Use a color profile for this device and browse to a color profile location if you want to use a specific color profile. ii. Select Media Rules and the corresponding media to sent specific items to specific printers. iii. Set the Bleed amount in pixels and select if you want to Apply

bleed on wallets & arrangements.