Setting Up a Tethered Camera. Canon Studio Solution

Tutorial: Running a Shoot

 Select Save Booking.

You will be returned to the customer details page. Your new booking will appear under the Current Bookings column.

Setting Up Your Camera

Most studios will be using a tethered or wireless camera that can instantly import photos into the software as they are captured.

If you will be importing from a folder or from a camera media card, skip ahead to capturing and importing photos.

Any Canon EOS DSLR cameras can shoot and send photos directly to the software while connected through a USB or firewire cable.

Follow these steps to set up your tethered camera for the shoot:

1. Select the Manage Studio tab from the bottom of the software and select the

Cameras from the top of the studio.

2. Select Tethered Camera from the left side of the software under Select Camera

Type.

3. Connect the camera to the computer with a USB cable.

4. Turn the camera on.

5. Wait for Windows to detect the camera and prepare it for use.

6. If the software does not detect the camera and display it on the left side of the software, select Detect Camera.

7. The camera name will appear in the status bar at the bottom left of the software, and at the top center of the Cameras page.

241