Camera Not Detected. Canon Studio Solution

Troubleshooting

Camera Not Detected

Your camera has not been detected. Click here to troubleshoot camera problems.

Can’t Connect to a Server or Client Station

There are a few common reasons for not being able to connect to a station. Before reading this guide, click here for a walkthrough to setting up your network.

Hardware Problems

It is possible that there is a problem with your computer equipment:

1. Ensure that every station is physically connected to the network, or that your wireless network is working properly.

2. Try restarting all of the computer stations and your router/modem.

3. Confirm that all stations are functioning and connected to your local area network.

Permissions

Your operating system permissions could be blocking the stations from accessing each other.

1. Ensure that you have administrative access to the server computer.

2. You will need to enable file sharing, share photo folders, and disable your firewall on the server computer. You can perform these functions in the software by navigating to Manage Studio > Options > Network Options and selecting Server

Computer from the left side of the software.

3. Select Enable File Sharing. a. For Windows XP: Follow the Network Setup Wizard to enable file sharing on your network. You will need to restart your computer before this takes effect. b. For Windows Vista: The Network and Sharing Center window appears. Turn

On the following options: Network discovery, File sharing, Public folder

sharing, and Printer sharing. Select X to exit this window when finished.

301