Saving Changes. Canon Studio Solution

Using: Photo Workshop Toolsets

Saving Changes

The software will not save color balance settings for a photo if you select another photo.

To save your settings for a photo, use the save options detailed here.

Using Preset Color Balances

Select a preset color balance to automatically compensate for lighting conditions.

There are four preset balances for the most basic types of lighting conditions:

 Daylight/Incandescent: compensates for the additional cyan and magenta in daylight and incandescent bulbs.

 Flash/Strobe: compensates for the additional red and yellow from camera flashes.

 Fluorescent: compensates for the additional red and yellow from fluorescent bulbs.

 Tungsten: compensates for the additional red and yellow from tungsten bulbs.

Select None to remove the preset color balance from your photo.

You can also select color balance to open a dropdown menu with all of your preset and attribute settings.

Applying Attributes

The C1 through C4 buttons correspond to your saved attribute settings.

To save your color balance attributes:

1. Set the color balance for your photo.

2. Click on the numbers between the color swatches.

3. A new color balance tool appears.

4. Adjust the color balance by dragging the bars or typing values into the text boxes.

203