advertisement
WAGO I/O System 750 Configuring via the Web-Based Management System (WBM) 171
750-890 Controller Modbus TCP; G4; 2ETH; SD
10.2 Open WBM
1. To open the WBM, launch a Web browser.
2. Enter the IP address of the fieldbus coupler/controller in the address bar.
3. Click [Enter] to confirm.
The start page of WBM loads.
4. Select the link to the desired WBM page in the left navigation bar.
The first time a configuration page is called, a login dialog appears
5. Enter your user name and password in the query dialog (default: user =
“admin”, password = “wago” or user = “user”, password = “user”).
The corresponding WBM page is loaded.
6. Make the desired settings.
7. Click [SUBMIT] to confirm your changes or click [UNDO] to discard the changes.
At the first confirmation via the [SUBMIT] button, a login dialog appears again. Proceed as described under point 5.
8. To apply the settings, you may have to reboot afterwards if this is indicated in the description text on the respective WBM page.
You restart the system using WBM page “Administration”, button
[SOFTWARE RESET] .
Manual
Version 1.2.2
advertisement
Key Features
- High performance and large memory
- Integrated PLC functionality
- Support for various communication protocols
- Wide range of connection possibilities
- Suitable for complex automation tasks
- Use in various industrial environments