Miscellaneous. WAGO Controller Modbus TCP

182 Configuring via the Web-Based Management System (WBM) WAGO I/O System 750

750-890 Controller Modbus TCP; G4; 2ETH; SD

10.8 Miscellaneous

On the Miscellaneous WBM page, you can set configuration options for various features and compatibility options.

These configuration options are stored in non-volatile memory when the

[SUBMIT] button is pressed. Changes to the configuration options take effect after the next power-on cycle or software reset.

Pos: 98. 35 /Se rie 7 50 (WAGO I/ O SYSTEM)/W eb-Bas ed -Ma nag eme nt-Syst em WB M/Seite Miscella neo us/Mis cellan eous - Tab elle ( 750 -89x ) @ 31\ mod_ 152 414 733 986 3_2 1.docx @ 4 826 62 @ @ 1

Table 56: WBM Page “Miscellaneous”

Global Settings

Entry Default

Autoreset on fatal error

BootP request before static IP

Non-adaptive local bus interval

Local bus extension installed









Description



Enables an automatic software reset to be conducted when a system error occurs











Disables an automatic software reset to be conducted when a system error occurs

Automatically set the static IP address enabled.

For this configuration, the fieldbus coupler/ controller uses a statically configured IP address if the request via BootP fails.

This process can take a few minutes. With the setting

"DHCP" this function has no effect.

Automatically set the static IP address disabled.

For this configuration, the IP address request via BootP is repeated in the event of error.

Enables a fixed sampling interval of the local bus and statically sets the pause time to 14 ms. As a result, possibly the sampling interval of the local bus is extended and more computing power is available for the

PLC application.

Enables the dynamic sampling interval of the local bus

(default). The pause time between two local bus cycles is dynamically adjusted. This shortens the sampling interval of the local bus and less computing power is available for the PLC application.



Indicates, that the bus extension (750-627/-628) is installed.

 Indicates, that no bus extension is installed.

Pos: 98. 36 /D okum ent ation allge mein/ Gliede run gsele me nte/ --- -Le erzeil e-( 1Z )-- -- @ 28 \mo d_1 485 2629 958 37_ 0.do cx @ 4040 06 @ @ 1

Pos: 98. 37 /Se rie 7 50 (WAGO I/ O SYSTEM)/W eb-Bas ed -Ma nag eme nt-Syst em WB M/Seite SD C ard /SD Car d - Einlei tun g @ 1 7\m od_ 138 3569 838 192 _21. docx @ 13 653 2 @ 2 @ 1

Manual

Version 1.2.2