WebVisu. WAGO Controller Modbus TCP

WAGO I/O System 750 Configuring via the Web-Based Management System (WBM) 205

750-890 Controller Modbus TCP; G4; 2ETH; SD

Pos: 98. 91 /Se rie 7 50 (WAGO I/ O SYSTEM)/W eb-Bas ed -Ma nag eme nt-Syst em WB M/Seite W ebVisu/We bVisu - Einleitu ng ( 89x ) @ 3 2\m od_ 153 984 6535 952 _21 .docx @ 5 0528 4 @ 23 @ 1

10.21 WebVisu

The visualization of your programmed application is displayed on the WBM page

“WebVisu” as an HTML page.

The prerequisite for this is that you have previously created this HTML page for your application with the visualization editor in WAGO-I/OPRO and loaded it into the fieldbus controller.

10.21.1 Generate WebVisu-HTML

Perform the following settings in WAGO-I/OPRO , to automatically generate at the transmission of your project an HTML page of your created visualization:

1. Double click to open the Target System Settings in the Resource register.

2. Open the Visualization register.

3. Select the Web Visualization option with a hatch mark.

4. Confirm with [OK} .

If the page has been generated, it will be displayed in the browser window, when you click in the navigation list on the link for the WBM page “WebVisu”.

Pos: 98. 92 /Se rie 7 50 (WAGO I/ O SYSTEM)/W eb-Bas ed -Ma nag eme nt-Syst em WB M/Seite W ebVisu/We bVisu - Einleitu ng - WebVisu als Sta rtseit e festl ege n @ 3 2\m od_ 153 984 654 4251 _21 .docx @ 5 0528 9 @ 3 @ 1

10.21.2 Set WebVisu as Start Page

In order to have access to the web visualization of your application directly at the

WBM call, you can specify the WBM page "WebVisu" as the WBM start page.

Please note, then the navigation bar will no longer be available for you to change to the other WBM pages.

1. Call up the WBM page "PLC Application".

2. Under Application Settings for WebVisu activate the option “Set

‘webvisu.htm' as default”.

For the call up of the WBM page "WebVisu" you can also specify with the other options whether you want this page in the active browser window (Open

‘webvisu.htm’ in frame) or in an additional browser window (Open ‘webvisu.htm' in new window).

Pos: 98. 93 /Se rie 7 50 (WAGO I/ O SYSTEM)/W eb-Bas ed -Ma nag eme nt-Syst em WB M/Seite W ebVisu/We bVisu - Hinweis: WebVisu als Star tseite de aktivier en! @ 4\ mod _12 426 4652 987 5_2 1.do cx @ 3349 8 @ @ 1

Manual

Version 1.2.2

206 Configuring via the Web-Based Management System (WBM) WAGO I/O System 750

750-890 Controller Modbus TCP; G4; 2ETH; SD

Return from “WebVisu” page via the IP address of the fieldbus controller!

The WBM page “Webvisu” does not have any hyperlinks to the other WBM pages.

To deactivate this starting page function, or to go to other WBM pages, enter the

IP address for your controller and the address for the original starting page in the

URL line of your browser with the following syntax: http://IP address of your controller/webserv/index.ssi

Pos: 99 /D oku ment ation allge mein /Glied eru ngsel eme nte/ -- -Seitenw echsel -- - @ 3 \mo d_1 221 108 0450 78_ 0.d ocx @ 218 10 @ @ 1

Manual

Version 1.2.2