Numeric Keypad and Special Features/Control Keys. Xerox 6030, 8830, 8825, 721P, 8825 DDS, 8850 DS, 6050, 8850, 8830 DDS, 510

Numeric Keypad and

Special Features/Control

Keys

In the COPY mode, the scanned image or set of images is printed on the

Printer and then deleted from the hard disk.

In the SCAN mode, the scanned image or set of images is stored on the hard disk for later retrieval over a network by a client running on a remotely located device. Scanned images can also be transferred to 4 remote FTP destinations from the Samples Mode screen. Refer to the

"Scanning to the Network" section for more information about the SCAN mode.

NOTE: The SCAN mode is an optional feature that is enabled by installing the Scan-to-Net feature key. Contact your XEROX representative for ordering information.

The right side of the Scan System Control Panel contains a numeric keypad for entering quantities, keys for selecting other features, and keys for controlling the scanning and printing of images. To the left of some of the keys are indicator lamps that illuminate when the associated feature has been selected.

Batch

Transform

Sample

Sets Build

Finisher

Store/

Recall

1

G H I

4

P R S

7

/.

Printer

Interrupt

Stop

A B C

2

J K L

5

T U V

8

0

D E F

3

M N O

6

W X Y

9

C/CA

Start

Numeric Keypad

The numeric keypad contains the

0

to

9

numeric keys, the decimal key and the

C/CA

key.

Numeric (

0-9

) keys

These keys are used for numeric entry, password entry, and copy quantity fields.

NOTE: The letters next to the numbers are for entering in User and

Account IDs and Scan Directory information.

/.

(Decimal key)

XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM

•

23