PASSWORD. Xerox 6030, 8830, 8825, 721P, 8825 DDS, 8850 DS, 6050, 8850, 8830 DDS, 510

READ NVR

PASSWORD

display NO RESPONSE FROM SCANNER if the Scan System does not respond to the test request.

17. Press the

Exit

key to return to the Component Tests menu screen.

The READ NVR option allows the examination of the contents of the non-volatile RAM (NVR). The service center may ask you to provide this information when calling for service.

To run the READ NVR diagnostic: the key. The MAIN MENU screen is displayed. the key until DIAGNOSTICS is highlighted. the key to select DIAGNOSTICS. The

DIAGNOSTICS menu screen is displayed. the key until SCANNER DIAGNOSTICS is displayed. the key to select SCANNER DIAGNOSTICS. The

SCANNER DIAGNOSTICS menu screen is displayed. the key until READ NVR is highlighted. the key to select READ NVR. The READ NVR screen is displayed. An "xx" displays for all the NVR values.

READ NVR

00 -07: xx xx xx xx xx xx xx xx

08 - 0F: xx xx xx xx xx xx xx xx

10-17:

18-1F: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx

PRESS START TO BEGIN

Read NVR Screen the key to display the actual values. the or

Next

key to scroll through the values.

There are 16 rows of values in all.

10. Press the

Exit

key to return to the SCANNER DIAGNOSTICS screen.

The PASSWORD option of the DIAGNOSTICS menu is for use by the

Customer Service Engineer only. It allows the Customer Service

Engineer to enter the password for access to password-protected diagnostic functions.

If you select this option, the PASSWORD screen is displayed. You cannot perform any functions in this screen. Press the Exit key to return to the COMPONENT TESTS menu screen.

136

•

Main Menu XEROX WIDE FORMAT COPY SYSTEM

PASSWORD

ENTE R PASSWORD:

Password Screen

XEROX WIDE FORMAT COPY SYSTEM Main Menu

•

137