Understanding the READY TO SCAN screen. Xerox 6030, 8830, 8825, 721P, 8825 DDS, 8850 DS, 6050, 8850, 8830 DDS, 510

PLEASE ENTER

DIRECTORY

Images

Please Enter Directory Screen

3. Enter a Directory name, up to 16 alphanumeric characters, to which you will scan the images. The name cannot begin with a period/decimal point.

Understanding the READY TO SCAN screen

Below is an example of the READY TO SCAN screen. Following the example are descriptions of the special information displayed on the screen.

READY TO SCAN

INSERT DOCUMENT

TIFF/CCITTG4

11 BIT

400

TIFF/CCITTG

41 BIT

Ready to Scan Screen

This area indicates the selected file format. Refer to

SCAN OPTIONS (LINE) or SCAN OPTIONS (PHOTO) or SCAN OPTIONS (COLOR) to set these options. The available options will differ depending upon your Scan

Option selection.

This area shows the selected scanning resolution.

Press the Previous or Next key to select a value of 100,

200, 300, or 400 DPI (Dots Per Inch). A new value can be selected before each scan.

This icon shows how much Random Access Memory (RAM) is in use by the scanned file. As space is used, the dark area increases. After the scan is complete, the file is processed and then moved to the internal hard disk. The RAM space then becomes available again.

This icon shows how much hard disk space is in use by stored files. As space is used, the dark area increases.

When files are moved off the disk over the network to remote devices, the space becomes available again. Files

XEROX WIDE FORMAT COPY SYSTEM Scanning to the Network (SCAN mode)

•

87