TECHNICAL DATA. EKOM DK50 2V, DK50 Plus Mobile, DK50 2V/M MOBILE, DK50 2V S, DK50 PLUS
Add to My manuals104 Pages
advertisement
![TECHNICAL DATA. EKOM DK50 2V, DK50 Plus Mobile, DK50 2V/M MOBILE, DK50 2V S, DK50 PLUS | Manualzz TECHNICAL DATA. EKOM DK50 2V, DK50 Plus Mobile, DK50 2V/M MOBILE, DK50 2V S, DK50 PLUS | Manualzz](http://s2.manualzz.com/store/data/068046796_1-36882131ed8e3404838d552b4056a0aa-360x466.png)
TECHNICAL DATA
TECHNICAL DATA
Compressors are designed to operate in dry, ventilated and indoor dust-free rooms with the following climatic conditions:
Temperature
Relative humidity from +5 °C to +40°C max. 70%
Working pressure 6 – 8 bar
Nominal voltage
Frequency a)
Performance at 6 bar (FAD)
Working pressure
Max. current
Motor power b)
V, Hz l/min bar
A kW
DK50 PLUS
230, 50
70
6.0 – 8.0
4.1
0.55
Air tank volume
Air quality - filtration
Maximum operating pressure of safety valve
Noise level at 5 bar (L pA
)
l m bar
25
-
11.0
Operating mode
PDP drying performance at 7 bar
Time to fill air tank from 0 to
7 bar
Dimensions (net) w x d x h
Net weight dB
%
°C s mm kg
≤57
S1-100
-
149
550x718x995
100 c)
Classification under EN 60601-1 Class I. a) State the compressor variant in the order b) For other range of pressure consult with the supplier c) Weight value is only informative data and applies only to a product without any accessories
Dependence of compressor capacity on working pressure
NP-DK50 PLUS, 2V-MOBILE-A-4_12-2019-MD 14 12/2019
TECHNICAL DATA
Working pressure 6 – 8 bar
Nominal voltage
Frequency a)
Performance at 6 bar
(FAD)
Working pressure b)
DK50 2V DK50 2V/M
V, Hz 230, 50 115, 60 230, 50 115, 60 l/min bar
135
6.0 – 8.0
104
6.0 – 8.0
Max. current
Motor power
A kW
8.8
1.2
20.1
1.1
8.9
1.2
20.2
1.1
Air tank volume
Air quality - filtration
Maximum operating pressure of safety valve
Noise level at 5 bar (L pA
) l
m bar dB
25
-
11.0
25
0,3
11.0
Operating mode %
°C
≤62
S1-100
S3-60 d)
≤64
-
≤62 ≤64
S1-100
S3-60 d)
+3°C
PDP drying performance at 7 bar
Time to fill air tank from 0 to 7 bar
Dimensions (net) w x d x h
Net weight s mm kg
61
550x718x995
104 c)
78
550x718x995
110 c)
Classification under EN60601-1 Class I. a) State the compressor variant in the order b) For other range of pressure consult with the supplier c) Weight value is only informative data and applies only to a product without any accessories d) Information about the weight is for informative purposes only and applies to the product without any additional accessories
Dependence of compressor capacity on working pressure
12/2019 15 NP-DK50 PLUS, 2V-MOBILE-A-4_12-2019-MD
TECHNICAL DATA
Working pressure 8 – 10 bar
Nominal voltage
Frequency a)
Performance at 8 bar
(FAD)
Working pressure b)
V, Hz l/min bar
Max. current
Motor power
A kW
Air tank volume
Air quality - filtration
Maximum operating pressure of safety valve
Noise level at 5 bar (L pA
)
Operating mode
PDP – drying performance at 7 bar
Tie to fill air tank from 0 to 7 bar
Dimensions (net) w x d x h
Net weight l
m bar dB
%
°C s mm kg
DK50 2V
230, 50
110
8.0 – 10.0
86
1.2
25
-
11.0
≤62
S1-100
-
96
550x718x995
107 c)
Classification under EN 60601-1 Class I. a) State the compressor variant in the order b) For other range of pressure consult with the supplier c) Weight value is only informative data and applies only to a product without any accessories
Dependence of compressor capacity on working pressure
NP-DK50 PLUS, 2V-MOBILE-A-4_12-2019-MD 16 12/2019
TECHNICAL DATA
FAD correction of capacity for altitude
Capacity given in the form of FAD („Free Air Delivery“) applies to the following conditions:
Altitude 0 m.n.m.
Atmospheric pressure 101325 Pa
Temperature
Relative humidity
20°C
0%
To calculate FAD compressor capacity in dependence on altitude, it is necessary to apply correction factor according to the following table:
Altitude [m.n.m.]
FAD correction factor
0 -1500
1
1501 - 2500
0,8
2501 - 3500
0,71
3501 - 4500
0,60
12/2019 17 NP-DK50 PLUS, 2V-MOBILE-A-4_12-2019-MD
advertisement
Related manuals
advertisement
Table of contents
- 6 GENERAL INFORMATION
- 6 CONFORMITY WITH THE REQUIREMENTS OF THE EUROPEAN UNION
- 6 SYMBOLS
- 7 DEVICE USE
- 8 GENERAL SAFETY INSTRUCTION
- 9 STORAGE AND TRANSPORT
- 10 PRODUCT DESCRIPTION
- 10 VARIANTS
- 10 PRODUCT FUNCTION
- 14 TECHNICAL DATA
- 18 INSTALLATION
- 18 INSTALLATION CONDITIONS
- 18 COMPRESSOR ASSEMBLY
- 19 PNEUMATIC CONNECTION
- 19 ELECTRICAL CONNECTION
- 19 COMMISSIONING
- 20 PNEUMATIC AND ELECTRICAL DIAGRAMS
- 26 OPERATION
- 27 SWITCHING ON THE COMPRESSOR
- 27 SWITCHING OFF THE COMPRESSOR
- 28 PRODUCT MAINTENANCE
- 33 LONG-TERM SHUTDOWN
- 33 DISPOSAL OF DEVICE
- 33 TROUBLESHOOTING
- 35 REPAIR SERVICE
- 98 ANNEX
- 98 INSTALLATION RECORD
- 37 ALLGEMEINE INFORMATIONEN
- 37 KONFORMITÄT MIT DEN ANFORDERUNGEN DER EU
- 37 SYMBOLE
- 38 NUTZUNG DES GERÄTS
- 39 ALLGEMEINE SICHERHEITSANWEISUNGEN
- 40 LAGERUNGS- UND TRSANSPORTBEDINGUNGEN
- 41 PRODUKTBESCHREIBUNG
- 41 MODELLE
- 41 PRODUKTFUNKTION
- 45 TECHNISCHE DATEN
- 49 INSTALLATION
- 49 INSTALLATIONSBEDINGUGEN
- 49 ZUSAMMENBAU DES KOMPRESSOR
- 50 ELEKTRISCHER ANSCHLUSS
- 50 INBETRIEBNAHME
- 57 BETRIEB
- 58 EINSCHALTEN DES KOMPRESSORS
- 58 AUSSCHALTEN DES KOMPRESSORS
- 59 PRODUKTWARTUNG
- 64 LANGFRISTIGE AUßERBETRIEBNAHME
- 64 ENTSORGUNG DES GERÄTS
- 65 FEHLERBEHEBUNG
- 66 INFORMATIONEN ZU REPARATURBETRIEBEN
- 98 ANHANG
- 99 INSTALLATIONSPROTOKOLL
- 68 VŠEOBECNÉ INFORMÁCIE
- 68 POŽIADAVKAMI SMERNÍC EURÓPSKEJ ÚNIE
- 68 POUŽITÉ SYMBOLY
- 69 POUŽITIE ZARIADENIA
- 70 ZÁKLADNÉ BEZPEČNOSTNÉ POKYNY
- 71 PREPRAVNÉ PODMIENKY
- 72 POPIS VÝROBKU
- 72 VARIANTY
- 72 FUNKCIA VÝROBKU
- 76 TECHNICKÉ ÚDAJE
- 80 INŠTALÁCIA
- 80 INŠTALAČNÉ PODMIENKY
- 80 ZOSTAVENIE KOMPRESORA
- 81 PNEUMATICKÉ PRIPOJENIE
- 81 ELEKTRICKÉ ZAPOJENIE
- 81 PRVÉ UVEDENIE DO PREVÁDZKY
- 82 PNEUMATICKÉ A ELEKTRICKÉ SCHÉMY
- 88 OBSLUHA
- 89 ZAPNUTIE KOMPRESORA
- 89 VYPNUTIE KOMPRESORA
- 90 ÚDRŽBA VÝROBKU
- 95 ODSTAVENIE
- 95 LIKVIDÁCIA PRÍSTROJA
- 95 VYHĽADÁVANIE PORÚCH A ICH ODSTRÁNENIE
- 97 INFORMÁCIE O OPRAVÁRENSKEJ SLUŽBE
- 98 PRÍLOHA
- 100 ZÁZNAM O INŠTALÁCII