advertisement
![Hardware Description. ETAS ES650 | Manualzz Hardware Description. ETAS ES650 | Manualzz](http://s1.manualzz.com/store/data/068176823_1-1a67cf55866a93a27275e298eae09d44-360x466.png)
ETAS
3
3.1
Hardware Description
Hardware Description
This chapter contains information on the following topics:
• ES600 Measurement Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• ES650.1 A/D and Thermo Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Maximum Input and Common-Mode Voltages. . . . . . . . . . . . . . . . . . . . 19
ES600 Measurement Modules
The ES6xx series comprises a range of advanced and powerful measurement and interface modules. All modules are designed for use under harsh environ mental conditions and are therefore ideally suited for automotive use. This applies both to the housings of the ES6xx series and all cable connections. The ability of these modules to operate under a wide range of ambient tempera tures and power supply voltages further contributes to their suitability for auto motive applications.
The compact and rugged housings of the ES6xx series allow easy mounting even under difficult installation conditions. By installing the modules close to the signal source, it is possible to avoid long signal lines that would corrupt measurement signals. The housings of the ES6xx series stack easily to build larger blocks of units.
The measurement modules provide a high sampling rate with high resolution and accuracy. The accuracy is guaranteed across A/D and Thermo Modulethe entire extensive ambient temperature range.
The interface modules provide the connection to the popular bus systems used in motor vehicles and to various emulator probes (ETK).
Each module is equipped with a powerful Ethernet interface that ensures highspeed data exchange with the host PC.
A synchronization and power management module makes it possible to con nect several measurement and interface modules to one Ethernet interface on the host PC. This synchronization and power management module also ensures simultaneous sampling of all measurement channels—even in large module networks. The periodic synchronization signal is superimposed onto the Ethernet signals without affecting data transfer. This excludes the possibil ity of a phase shift between the individual signals, even when measurements are taken from different modules.
All modules of the ES6xx series have an automatic power saving feature. For this purpose, the modules are equipped with a link signal detector that is con trolled directly by the Ethernet interface. As soon as a device connected to the
ES650.1 starts to send link signals via the Ethernet interface, the module is
ES650.1 - User Guide 12
advertisement
Related manuals
advertisement
Table of contents
- 5 About this Document
- 5 Classification of Safety Messages
- 5 Presentation of Instructions
- 6 Typographical Conventions
- 6 Presentation of Supporting Information
- 6 Scope of supply
- 6 Additional information
- 7 Basic safety notices
- 7 General safety information
- 7 Requirements for users and duties for operators
- 7 Intended use
- 12 Hardware Description
- 12 ES600 Measurement Modules
- 13 ES650.1 A/D and Thermo Module
- 13 Overview
- 14 Features
- 15 Package Contents
- 15 Housing
- 16 Ports and Indicators
- 16 Front Side
- 17 Indicators
- 18 Rear Side
- 19 Maximum Input and Common-Mode Voltages
- 20 Measurement Accuracy
- 22 Getting Started
- 22 Installation and blocking
- 22 General installation recommendations
- 22 Fastening the module onto a carrier system
- 23 Connecting several modules mechanically
- 24 Cabling
- 26 Configuration
- 26 Calibration
- 27 Technical Data
- 27 General Data
- 27 Product labeling
- 28 Fulfilled Standards and Norms
- 28 Environmental Conditions
- 28 Maintenance the Product
- 28 Cleaning the product
- 28 Mechanical Data
- 29 RoHS Conformity
- 29 CE conformity
- 29 UKCA conformity
- 29 KCC conformity
- 29 Taking the Product Back and Recycling
- 30 Use of Open Source software
- 30 System Requirements
- 30 Hardware
- 31 Software
- 32 Electrical Data
- 32 Power Supply
- 32 Host Interface
- 32 Analog Voltage Inputs
- 33 Thermocouple Inputs
- 34 Pin Assignment
- 34 Analog Inputs
- 34 Thermocouple Inputs
- 35 Ethernet Interface, Power Supply
- 35 External Display
- 36 Cables and Accessories
- 36 Measuring Cable
- 36 Measuring Cable with Banana Plugs
- 36 Measuring Cable with BNC Plugs
- 36 Adapter Cable with BNC Plugs
- 37 Ethernet Cable/Power Supply Cable
- 37 Y-Cable (ES650.1 in Stand-alone Mode)
- 38 Connecting Cables to the ES
- 40 Ordering Information
- 40 Accessories
- 41 Calibration
- 43 Configuration
- 44 Contact Information
- 45 Figures
- 46 Index