Package Contents. ETAS ES650

ETAS

3.3

3.4

Hardware Description

• Parameterized software filters for signal smoothing with adaptive cutoff frequency

• High resolution

• Data transfer via Ethernet

• Synchronous data acquisition

• Automatic power saving feature (standby mode)

• Rugged, functional metal housing

• Member of the ETAS Tool Suite – supported by INCA

For complete technical data of the ES650.1, refer to Chapter “Technical Data” on page 27.

Package Contents

The ES650.1 is available as two different packages.

• Package variant „ES650.1“ includes the following parts:

– the ES650.1 A/D and Thermo Module

– a combined Ethernet cable and power supply cord CBEP110-2, 2 m

– four T-brackets to daisy-chain the housings

• Package variant „ES650.1-SCB“ includes the following parts:

– the ES650.1 A/D and Thermo Module

– four T-brackets to daisy-chain the housings

Additional connection cables for connection to the sensors and extension cables can be ordered separately from ETAS. A list of available accessories and

ordering information can be found in Chapter “Ordering Information” on page 40 of this manual or in the ETAS product catalog.

Before using your ES650.1, check that the unit has been delivered with all required parts and cables.

Housing

The ES650.1 uses a housing with connections on the front and the rear side of the device. The robust metal housing of the ES650.1 is equipped with non-slip plastic feet.

The module is designed for the accommodation in the vehicle or lab. In order to stabilize it, it can easily be screwed onto a support system. The housings of this device family can also be connected with each other – quickly and easily (see

chapter 4.1 on page 22.

ES650.1 - User Guide 15