Transportation. Mitsubishi Electric AE2000-SWA, AE4000-SW, Low-Voltage Air Circuit Breakers series Type AE-SW, AE3200-SW, AE630-SW

Transportation

Do not drop the product during transportation and storage.

Fig. 7-1

Do not roll the product.

Fig. 7-2

Wire length 1 m or more

Lifting hook hole

R12.5

Wire length 1 m or more

Lifting hook (HP)

25

CONNECT position

Fixed type

Fig. 7-3

Take caution not to scratch the control circuit terminal block when lifting the product with the lifting hook (HP). Securely attach the lifting hook (HP) so that they will not come off during transportation.

Locking plate

Drawout type

Fig. 7-4

When transporting the product with its cradle attached, check that the lock plate is protruded in the CONNECT position. Do not use anything else but the lifting holes.

Fig. 7-5

Since the conductors side is heavy, be careful not to give an impact to the product and the conductors when landing the product.

1 m or longer

Fig. 7-6

When transporting a drawout type breaker (AE4000-SW ~ AE6300-SW), be sure to use 4 wires with a length of 1 m or longer, or a lifter.

E-7