Installation of the drawout handle/Installation of the inter-phase barrier (BA). Mitsubishi Electric AE2000-SWA, AE4000-SW, Low-Voltage Air Circuit Breakers series Type AE-SW, AE3200-SW, AE630-SW

Installation of the drawout handle

The drawout handle can be installed either onto the right or left of the cradle as required.

A drawout handle, installation bracket, installation screws, and hexagon nuts are provided with the breaker.

 Installation onto the left side

Installation bracket

 Installation onto the right side

Drawout handle

Note) When a mechanical interlock (MI) or door interlock (DI) is attached, the drawout handle cannot be installed onto the right side of the cradle.

Mechanical interlock (MI) or Door interlock (DI)

Cradle

Fig. 9-1

Hexagon nut M5 (supplied)

Installation screw (+) M5 × 12 (supplied)

Tightenning torque:3.2 ± 0.4 N∙m

Fig. 9-2

Fig. 9-3

Installation of the inter-phase barrier (BA)

Insert in the slot on the breaker. (Refer to Fig. 9-4 and Fig. 9-5)

< Fixed type > < Drawout type >

Fig. 9-4 Fig. 9-5

E-9