MP 2555/3055/3555/4055/5055/6055 series Operating Instructions

2. Getting Started

This chapter describes how to start using this machine.

Guide to Names and Functions of Components

Guide to Components (mainly Europe)

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Front and left view

1

2

4 7

3

8

9

5

6

DRY201

1. ADF

Lower the ADF over originals placed on the exposure glass.

If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

2. Exposure glass

Place originals face down here. For details, see page 86 "Placing Originals on the Exposure Glass

(mainly Europe)".

29

30

2. Getting Started

3. Vents

Prevent overheating.

4. Control panel

See page 56 "Guide to the Names and Functions of the Machine's Control Panel".

5. Internal tray 1

Copied/printed paper and fax messages are delivered here.

6. Front cover

Open to access the inside of the machine.

7. Main power switch

To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and turn the switch on.

8. Paper trays (Trays 1–2)

Load paper here. For details, see page 151 "Loading Paper".

9. Lower paper trays

Load paper here. For details, see page 151 "Loading Paper".

Guide to Names and Functions of Components

Front and right view

1

2

3

4

5

6

7

DRY202

1. ADF's extender

Pull this extender to support large paper.

2. Bypass tray

Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the paper

trays. For details, see page 152 "Loading Paper into the Bypass Tray".

3. Paper guides

When loading paper in the bypass tray, align the paper guides flush against the paper.

4. Extender

Pull this extender out when loading sheets larger than A4 , 8

1

/

2

× 11 in the bypass tray.

5. Vents

Prevent overheating.

31