advertisement
Publishing
Page Insertion Options
Check Box Selection
Page insert
Page Insertion Type
Inserts a blank page.
Page insert
Print onto front
Prints on the front side of the inserted page.
Page insert
Print onto back
Prints on the back side of the inserted page.
Page insert
Print onto front
Print onto back
Prints on both sides of the inserted page.
Transparency Interleaving
Transparency interleaving inserts a backing sheet between printed transparencies. The backing sheet, also known as an interleaf, helps keep transparencies clean and prevents them from clinging together. This feature is
7-6
User Guide
Printing System Driver
Publishing
only available when printing on transparencies supplied from the MP tray. You can print the same content on the backing pages as on the transparencies.
Transparency interleaving cannot be used together with Cover mode or
Page insert.
Inserting Backing Sheets Between Transparencies
You can insert backing sheets between transparencies.
1
In the Basic tab > Media type, select Transparency. If the Source and Media
type lists have been combined (by a selection in Device Settings >
Compatibility Settings), Media type does not appear. Instead, in the Source list select Auto (Transparency).
2
In the Publishing tab, select Transparency interleaving.
3
To print the transparency content on the inserted pages also, select the Print
onto backing check box.
4
In the Media for backing list, select the Media type of the backing sheet or the
Source paper cassette. When you choose the media type, a source cassette matching that media type is automatically selected.
5
Click OK to return to the Print dialog box.
6
Click OK to start printing.
The printing system's operation panel prompts you to load transparencies into the MP tray, and if necessary, load backing paper into the selected cassette.
7-7
advertisement