Cold Start GPS. Maretron DSM250-01

Figure 118 – Restoring Factory Defaults on the GPS100

6.14.2 Cold Start GPS

The DSM250 is capable of restarting the GPS algorithm on a Maretron GPS100. You can choose this setting by pressing the Enter key ( ) with the “Cold start GPS Engine” menu item selected which

causes the screen shown in Figure 119 to be displayed. This will cause the GPS100 to discard all

position and satellite data and compute a position fix.

Figure 119 – Performing a Cold Start of the GPS100

6.14.3 GPS Mode Setting

The DSM250 is capable of setting the minimum operating mode on a Maretron GPS100. You can choose this setting by pressing the Enter key ( ) with the “GPS Mode:” menu item selected which

causes the screen shown in Figure 120 to be displayed.

Revision 1.4.16a Page 121