Line Graph. Maretron DSM250-01

DSM250 User’s Manual

selected by setting a value for the XTE alarm (See Section 5.2.1, “Alert Setup Menu”, on page 27 for

details).

Figure 241 – Rolling Road Display

7.7 Line Graph

The line graph display shows the value of a parameter displayed on the horizontal axis versus time

on the vertical axis. Figure 242 below shows the line graph display for barometric pressure over a

time period of one day. The line graph display can show the selected data over a time period of 1, 2,

3, 4, 5, 6, or 7 days. Line graph displays are supported only for barometric pressure.

Figure 242 – Line Graph Display

7.8 Weather Display

The DSM250 supports a single-screen weather display that shows a wide variety of weather-related

information. A screen shot of the weather display appears in Figure 243 below.

Page 204 Revision 1.4.16a

Figure 243 – Weather Display

The weather display shows the following information

• Wind Direction (Ground Referenced)

• Wind Speed (Ground Referenced)

• Heat Index / Wind Chill

Temperature

Humidity

Pressure

• Dew

Temperature

• Inside

Point

• Moon

• Sunrise

• Sunset

Revision 1.4.16a Page 205