Accepting or Cancelling an Alert. Maretron DSM250-01

8.2 Accepting or Cancelling an Alert

Active Alerts may be accepted (4.3.2) by the operator to indicate that the operator has taken

responsibility for the Alert. Alerts that have been triggered and the cause removed without being accepted by a user must be cleared.

8.2.1 From a Favorite Screen

The Alert with the highest priority that requires accepting or cancelling is shown at the bottom left of

the screen (see Figure 253). This Alert may easily be accepted or cancelled without changing

screens by pressing the Power button .

8.2.2 From the Alert Status Screen

Use the Scroll Up and Scroll Down buttons to select the Alert to be accepted or cancelled, and then press the Enter button. An Alert Description screen will be displayed with the details of the Alert and the cursor positioned over the Accept/Cancel Alert entry.

Revision 1.4.16a Page 213