Connecting a USB Device. Samsung LN52B750, LN46B750 - 46" LCD TV, LN40B750

MEDIA PLAY (USB & DLNA)

¦

Connecting a USB Device

1. Press the POWER button to turn the TV on.

2. Connect a USB device containing photo, music and/or movie files to the

USB1(HDD) or USB2 jack on the side of the TV.

. When the Application selection screen is displayed, press the ENTER E button to select Media Play (USB & DLNA) .

N MTP (Media Transfer Protocol) is not supported.

N The file system supports FAT16, FAT32 and NTFS.

N Certain types of USB Digital camera and audio devices may not be compatible with this TV.

N

N

Media Play only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported.).

Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility problem.

N

N

N

N

N

N

N

N

N

N

N

N

N or

USB Drive

PHOTO

TV Side Panel

SUM

851.86MB/993.02MB Free

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

Connect a USB HDD to the dedicated USB1(HDD) port. Warning: Do not exceed 1.5 amperes.

Do not disconnect the USB device while it is loading.

SUM

Photo

Device

Music Movie Setup e Exit

MSC supports MP3, JPEG and movie files, while a PTP device supports JPEG files only.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.

If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000 files.

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.

If more than 2 PTP devices are connected, you can only use one at a time.

If more than one MSC device is connected, some of them may not be recognized. If a device requires high power (more than 500mA or 5V), the USB device may not be supported.

If an over-power (Fail add new device USB1/USB2 Power Overload) warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.

[750-NA]BN68-02111B-Eng.indb 39

English - 9

2009-03-30 �� 1:42:54