Vehicle Data Recorder

VDR Operator's Manual

Safety

You should read and understand this safety information before installing, assembling and using this equipment.

DO

observe the safety warnings and notices in this document.

This indicates the presence of a hazard that can cause serious personal injury if the hazard is not avoided.

This indicates the presence of a hazard that can cause damage t o the VDR, a vehicle; other equipment connected to the VDR, or might corrupt software if the hazard is not avoided.

Proper Installation and Use of this Equipment

This equipment has been designed, manufactured and tested to meet the requirements of International Standards; however, like any apparatus, care must be taken in its installation and use.

This equipment must only be used by properly trained personnel.

Do not allow any cables of this equipment to be positioned where they can be trapped, snagged, stretched across sharp edges, or create any potential hazard.

If the VDR is being used in a moving vehicle, ensure that the VDR and cables do not distract or interfere with the driver, or form a hazard in anyway.

Do not allow any cables to become entangled with operator or driving controls. This can cause interference with driving and c an cause injury.

DO use this equipment in accordance with the operating procedures.

Before carrying out maintenance and cleaning of the VDR, make sure the unit is not connected to a power source, vehicle, or PC (see

Care & Maintenance

). Use only a well-diluted, mild, nonabrasive cleaning agent applied using a soft, lint free cloth.

DO NOT

use or apply undiluted cleaning agent directly to the equipment surface and do not soak the cloth. Take care that cleaning fluid does not enter connector receptacles.

5