advertisement
VDR Operator's Manual
6. Select parameters (see
Parameter Selection
).
7. Select parameter settings (see
Recording Time Set-up and Trigger Set-up
).
8. Press
Tick
to continue.
9. The VDR
Download
pop-up displays user defined configurations.
10. Press
Tick
to begin download process (see
VDR Download
).
Hook-up to Vehicle screen will appear once VDR download process has been completed.
Parameter Selection
The
Parameter Selection
screen will appear with the default parameters and units selected. This screen allows the selection of parameters and units, the selection from previously saved settings, capture times, and select and deselect triggers.
The Diagnostic Trouble Code Count parameter, when available, is a pre-selected, pre-defined trigger used for auto-capture, and cannot be deselected.
To select parameters or units:
1. Select
Parameter Selection
tab.
2. Select desired parameters and units to record.
3. To save parameter, trigger, and recording time settings:
12
advertisement
