Introductory example
Adjusting the TSX CFY module
Inputting axes adjustment parameters
For each axis, enter the configuration parameters in the following way:
Step Action
1 Select position 3 in rack 1 then execute the command Edit
→
Open module (or double click on the selected module).
2 Click on the arrow situated to the right of the Configuration field and select Ad-
justment.
3 Configure the adjustment parameters for channel 0. To do this: l l select channel 0, enter the adjustment parameters, in line with the following screen:
Adjustment screen for channel 0
TSX CFY 21 [RACK1 POSITION 3]
Configuration
Designation: MOD.MOT.PAS A PAS 2 VOIES
Symbol:
Choose Axis: Function:
Channel 0 Positioning
Task:
MAST
Unit
Acceleration ms
Command mode
A = +Pulse/ B = -Pulse
Command parameters
Max. speed
Acc max.
VMax/
18 000
200
Event input
Rising edge
Falling edge
Hertz ms
Drive inversions
Enable output
Input Check
Direction of command
Reference point
Short cam / - Direction
Boost
Automatic control
Inversion
Brake
Automatic control
Inversion
Event
EVT
TLX DS 57 PL7 40E 09.2000
31
Introductory example
Step
4
Action
Confirm your entries using the command Edit
→
Confirm or by clicking on the icon
5
6
Carry out the same adjustments for channel 1 of the module by repeating the procedure from step 3 for channel 1
Then confirm the global configuration using the command Edit
→
Confirm or by clicking on the icon
32
TLX DS 57 PL7 40E 09.2000
