Program transfer. Schneider Electric PL7 Junior/Pro - Premium PLC Application-specific functions - Step-by-step axis control

Introductory example

Program transfer

Procedure for transferring a program

After having configured your application and input your program, you must transfer them into the PLC processor’s memory, by following the procedure below:

Step

1

2

3

4

Action

Connect the terminal to the PLC using the command AP

→

Connect

Activate the command AP

→

Transfer program.

Select the option Terminal - > PLC.

Confirm the transfer.

TLX DS 57 PL7 40E 09.2000

45