Enter Setup Mode. RCA RCU1010RF

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:30 AM Page 8

8

Enter Setup Mode

The following are the screen selections you will see in the Setup Mode.

1. Code Setup Mode?

2. Code Search Mode?

3. Key Labels Mode?

4. Set SmartMacro?

5. Delete a Macro?

(Only appears once a Macro function has been programmed.)

6. Macro Key Delay Edit?

(Only appears once a Macro function has been programmed.)

7. Setup a Timer?

8. Delete a Timer?

(Only appears once a Timer function has been set.)

9. Learn IR Mode?

10. Delete IR Mode?

(Only appears once an

IR function has been learned.)

11. Delete IR ALL?

(Only appears once an

IR function has been learned.)

12. Set More Options?

a)

Set Time?

b)

Set Beep?

c)

Set LCD On Time?

d)

Set Light (Backlight) On Time?

e)

Set Volume TV<>AUDIO?

13. Reset ALL?

14. Exit Setup

Exit Setup Mode

To exit the Setup Mode at any time and return to normal operation, follow these steps:

1. Press and release the LCD EXIT key on the touchscreen.

Then press and release the LCD OK key on the Exit Setup

Screen. The remote is now in normal operation mode.

OR

2. Press and release the SETUP key repeatedly until the LCD displays the Exit Setup Screen. Press and release the LCD

OK

key. The remote is now in normal operation mode.

+

+