8. USER PHONE NUMBERS. Eldes EKB3

8. USER PHONE NUMBERS

The system supports up to 5 user phone numbers identified as User 1 through 5. When the phone number is set, the user will be able to arm/disarm the system by SMS text messages and free of charge phone calls (see 12.1. Free of Charge Phone Call and 12.2. SMS Text

Message) as well as to configure the system by SMS text messages. User phone numbers are also used to receive alarm phone calls and

SMS text messages from the system (see 17. ALARM INDICATIONS AND NOTIFICATIONS).

By default, the system ignores any incoming calls and SMS text messages from a non-preset phone number as well as it rejects the SMS text messages containing wrong SMS password even from a preset user phone number (see 8.2. System Control from any Phone Number).

To set User 1 phone number is mandatory, while the other 4 are optional. The supported phone number format is the following:

• International (w/o plus) – The phone numbers must be entered starting with an international country code in the following format: [international code][area code][local number], example for UK: 4417091111111.

Set user phone number

SMS

EKB2

EKB3

SMS text message content: ssss_NRup:ttteeellnnuumm

Value: ssss – 4-digit SMS password; up – user phone number slot, range – [1... 5]; ttteeelln-

nuumm – up to 15 digits user phone number.

Example: 1111_NR1:4417091111111

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → CALL/SMS SETTINGS

→ OK → USERS → OK → USER 1... 5 → OK → PHONE NUMBER → OK → ttteeellnnuumm → OK

Value: aaaa – 4-digit administrator password; ttteeellnnuumm – up to 15 digits user phone number.

Enter parameter 17, user phone number slot & phone number:

17 up ttteeellnnuumm #

Value: up – user phone number slot, range – [01... 05]; ttteeellnnuumm – up to 15 digits user phone number.

Example: 17014417091111111#

Config

Tool

This operation may be carried out from the PC using the ELDES Configuration Tool software.

View user phone number

SMS

EKB2

SMS text message content: ssss_HELPNR

Value: ssss – 4-digit SMS password.

Example: 1111_HELPNR

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → CALL/SMS

SETTINGS → OK → USERS → OK → USER 1... 5 → OK → PHONE NUMBER → PHONE NUMBER

Value: aaaa – 4-digit administrator password.

Config

Tool

This operation may be carried out from the PC using the ELDES Configuration Tool software.

30 EN MANUAL ELDES ESIM264 V3.1