22. GSM CONNECTION STATUS MONITORING. Eldes EKB3

22. GSM CONNECTION STATUS MONITORING

The system constantly supervises the GSM connection. When the GSM signal is lost, the system indicator NETW will light OFF, the keypad will indicate system fault condition (see 29. INDICATION OF SYSTEM FAULTS) and the system will turn ON a determined PGM output if the GSM signal is lost for a longer time period than the set delay value (By default – 180 seconds). Once the GSM signal restores, the keypad will no longer indicate system fault and the determined PGM output will turn OFF.

By default, the PGM output for GSM signal loss indication is not set. To set the PGM output and delay duration for GSM signal loss indication, please refer to the following configuration method.

Manage GSM signal loss indication by PGM output

Config

Tool

This operation may be carried out from the PC using the ELDES Configuration Tool software.

MANUAL ELDES ESIM264 V3.1

EN