20. SIREN/BELL. Eldes EKB3

20. SIREN/BELL

When the system is in alarm state, the siren/bell will sound until the set time (By default – 1 minute) expires or until the system is disarmed.

To set the alarm duration, please refer to the following configuration methods.

Set alarm duration SMS

EKB2

EKB3

SMS text message content: ssss_SIREN:t

Value: ssss – 4-digit SMS password; t – alarm duration, range – [0... 5] minutes.

Example: 1111_SIREN:4

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS

→ OK → ALARM DURATION → OK → tt → OK

Value: aaaa – 4-digit administrator password; tt – alarm duration, range – [1... 10] minutes.

Enter parameter 10 & alarm duration:

10 tt #

Value: tt – alarm duration, range – [00... 10] minutes.

Example: 1007#

Config

Tool

This operation may be carried out from the PC using the ELDES Configuration Tool software.

View alarm duration

SMS

EKB2

SMS text message content: ssss_SIREN

Value: ssss – 4-digit SMS password

Example: 1111_SIREN

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS

→ OK → ALARM DURATION

Value: aaaa – 4-digit administrator password.

Config

Tool

This operation may be carried out from the PC using the ELDES Configuration Tool software.

For siren/bell wiring diagram, please refer to 2.3.3. Siren.

NOTE: 0 value disables the siren/bell.

NOTE: Due to battery power saving reasons, the wireless siren will sound for 1 minute regardless of the set alarm duration time, unless it is set to 0.

MANUAL ELDES ESIM264 V3.1

EN