FADER START FUNCTION. Pioneer SVM-1000

01_SVM-1000_En.book 35 ページ２００７年１０月１６日　火曜日　午前９時２２分

FADER START FUNCTION

FADER START FUNCTION

By connecting the optional Pioneer DJ/VJ DVD Player or DJ CD Player control cable, the channel fader and cross fader can be used to start DVD/CD playback.

When the mixer’s channel fader lever or cross fader lever are moved, the DVD/CD player is released from the pause mode and automatically –and instantly – begins playback of the selected track. Also, when the fader lever is returned to its original position, the DVD/

CD player returns to its cue point (back cue), thus allowing “sampler” type play.

FADER

START

CROSS FADER

ASSIGN

Cross fader lever (A/B)

Using the Cross Fader to Start Playback

1 Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control.

• The button for the selected channel lights.

2 Set the CROSS FADER ASSIGN switch for the selected channel to [A] or [B].

• Select [ A ] to assign to cross fader channel A (left side).

• Select [ B ] to assign to cross fader channel B (right side).

3 Move the cross fader lever to the full opposite side away from the DVD/CD player you wish to start.

4 Set the DVD/CD player to the desired cue point, and engage cue point standby.

• If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point.

5 At the instant you wish to start playback, move the cross fader lever (A/B).

• DVD/CD player begins playback.

• After playback has begun, if the cross fader lever is moved fully to the opposite side, the DVD/CD player assigned to the opposite side channel will return to the cue point and enter standby mode (back cue).

CROSS FADER START PLAY AND BACK

CUE PLAY

When the DVD/CD player assigned to cross fader channel A is set to standby at a cue point, moving the cross fader lever from the right (B) side toward the left (A) side automatically starts play on the channel A DVD/CD player.

When the cross fader lever reaches the left (A) side, the DVD/CD player assigned to channel B goes to back cue (returns to cue point). Also, when the DVD/CD player assigned to channel B is set to standby at a cue point, moving the cross fader lever from the left

(A) side to the right (B) side automatically starts playback on the channel B DVD/CD player. When the cross fader lever reaches the right (B) side, the DVD/CD player assigned to channel A goes to back cue (returns to cue point).

Using the Channel Fader to Start Playback

1 Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control.

• The button for the selected channel lights.

2 Set the channel fader lever to [0].

3 Set the DVD/CD player to the desired cue point, and engage cue point standby.

• If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point.

4 At the instant you wish to start playback, move the channel fader lever.

• DVD/CD player begins playback.

• After playback has begun, if the channel fader lever is returned to the [ 0 ] position, the DVD/CD player returns to the cue point and re-enters standby mode (back cue).

• Playback control is possible with the channel fader only with the CROSS FADER ASSIGN switch is set to [ THRU ].