advertisement
1 Introduction
1.1
Foreword
You made an excellent choice buying the Altus Positioning Systems Network Rover.
Don’t drop the call!
Do not lose time with dropped calls. Your source of corrections is most secure with
APS-NR2.
It has been designed with a dual antennae cell modem to optimize call retention.
Light
Despite its smarts on board and the wireless technologies the APS-NR2 only weighs
760 grams and measures only 167mm in diameter.
Work all day
The batteries of the APS-NR2 are hot swappable.
With the two batteries in the device and the two spares you will span more than a full working day!
The charger and batteries are non proprietary so it is easy and inexpensive to keep spares.
Use your existing phone or tablet
Esri ready
The APS-NR2 communicates with any device having a Wi-Fi radio.
Simply connect to the APS-NR2, open your browser and your APS-NR2 is configured within minutes.
The APS-NR2 has been designed specifically for users of ArcGIS to enrich their database with highly accurate positions. Alternatively you may use the APS-NR2 with industry leading survey software like SurvCE, Field Genius or Digiterra.
Works in any network
The APS-NR2 works within all types of RTK networks. Its auto detect function selects the correction type!
4 | P a g e
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 5 Foreword
- 6 APS-NR2 Technical Characteristics
- 7 User Notice
- 7 Warranty
- 8 Technical Support
- 9 CE NOTICE
- 9 ROHS/WEEE NOTICE
- 10 FCC Regulations
- 11 IC Regulations
- 12 Safety Information
- 13 Shipping Case Contents
- 14 APS-NR2 Overview
- 14 Front Panel
- 15 Power Button Functions
- 16 Location of Batteries and SIM card
- 16 Closing the battery door
- 17 APS-NR2 Connector
- 18 The Web Interface
- 19 Initial set up
- 19 Prerequisites
- 20 Insert the micro SIM card
- 20 Insert the batteries
- 20 Switch on the APS-NR
- 20 Wait for the APS-NR2 to start up
- 20 Make sure the Wi-Fi radio is switched on
- 21 Connect to the Web Interface
- 22 Basic Configuration of the APS-NR2 for RTK
- 23 Set up the cellular modem
- 25 Configure as NTRIP client
- 27 APS-NR2 Configured for RTK
- 28 Configuring the output
- 28 Connect Bluetooth
- 29 Configure the NMEA for Bluetooth output