advertisement
![APS-NR2 Technical Characteristics. Telit Communications S.p.A. RI7T56KL1 | Manualzz APS-NR2 Technical Characteristics. Telit Communications S.p.A. RI7T56KL1 | Manualzz](http://s2.manualzz.com/store/data/063080919_1-208f9b580c0a74ee20c86a29d66e9fcf-360x466.png)
1.2
APS-NR2 Technical Characteristics
The APS-NR2 provides multi-frequency GNSS capability and wireless communications.
a Septentrio AsteRx-m GNSS receiver inside.
Fully wireless operations via Wi-Fi, Bluetooth and Cell networks.
Intuitive device-independent graphical web-interface.
Four Li-Ion hot-swappable batteries.
8GB memory for internal data logging.
1.2.1
GNSS Key Features
136 Channel AsteRx-m, with L1/L2/L2C GPS, GLONASS and SBAS.
RTK, SBAS, DGPS and Standalone positioning modes.
Navigation Performance Horizontal (m)
Standalone (Autonomous) 1.3
SBAS (WAAS, EGNOS, MSAS) 0.6
DGPS (RTCM1,3 / 9,3)
RTK (Fixed)
0.5
0.006 + 0.5 ppm
Vertical (m)
1.9
0.8
0.9
0.01 + 1 ppm
Table 1: APS-NR2 Facts & Figures
The APS-NR2 can be mounted on a standard survey rod with a 5/8" thread.
5 | P a g e
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 5 Foreword
- 6 APS-NR2 Technical Characteristics
- 7 User Notice
- 7 Warranty
- 8 Technical Support
- 9 CE NOTICE
- 9 ROHS/WEEE NOTICE
- 10 FCC Regulations
- 11 IC Regulations
- 12 Safety Information
- 13 Shipping Case Contents
- 14 APS-NR2 Overview
- 14 Front Panel
- 15 Power Button Functions
- 16 Location of Batteries and SIM card
- 16 Closing the battery door
- 17 APS-NR2 Connector
- 18 The Web Interface
- 19 Initial set up
- 19 Prerequisites
- 20 Insert the micro SIM card
- 20 Insert the batteries
- 20 Switch on the APS-NR
- 20 Wait for the APS-NR2 to start up
- 20 Make sure the Wi-Fi radio is switched on
- 21 Connect to the Web Interface
- 22 Basic Configuration of the APS-NR2 for RTK
- 23 Set up the cellular modem
- 25 Configure as NTRIP client
- 27 APS-NR2 Configured for RTK
- 28 Configuring the output
- 28 Connect Bluetooth
- 29 Configure the NMEA for Bluetooth output