advertisement
![Shipping Case Contents. Telit Communications S.p.A. RI7T56KL1 | Manualzz Shipping Case Contents. Telit Communications S.p.A. RI7T56KL1 | Manualzz](http://s2.manualzz.com/store/data/063080919_1-208f9b580c0a74ee20c86a29d66e9fcf-360x466.png)
2 Shipping Case Contents
One APS-NR2 system includes the following items:
Item
USB Cable
Four Li-Ion Batteries
Battery Charger
USB stick
Wall Charger
Purpose
Configuration via USB
Powering the APS-NR2
Dual bay external battery charger via a wall plug or a cigarette lighter
Software Programs and Manuals
Charging the batteries from a wall plug while they are inside the APS-NR2
Table 2: APS-NR2 Delivery Package
The package always contains two EU power cables: One is needed for the battery charger and one for the wall charger. The power cables of the battery charger and the wall charger are interchangeable.
When shipped outside of continental Europe, two extra power cables matching the requirements of the country of destination are added.
Figure 1: Shipping Contents
1 2 | P a g e
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 5 Foreword
- 6 APS-NR2 Technical Characteristics
- 7 User Notice
- 7 Warranty
- 8 Technical Support
- 9 CE NOTICE
- 9 ROHS/WEEE NOTICE
- 10 FCC Regulations
- 11 IC Regulations
- 12 Safety Information
- 13 Shipping Case Contents
- 14 APS-NR2 Overview
- 14 Front Panel
- 15 Power Button Functions
- 16 Location of Batteries and SIM card
- 16 Closing the battery door
- 17 APS-NR2 Connector
- 18 The Web Interface
- 19 Initial set up
- 19 Prerequisites
- 20 Insert the micro SIM card
- 20 Insert the batteries
- 20 Switch on the APS-NR
- 20 Wait for the APS-NR2 to start up
- 20 Make sure the Wi-Fi radio is switched on
- 21 Connect to the Web Interface
- 22 Basic Configuration of the APS-NR2 for RTK
- 23 Set up the cellular modem
- 25 Configure as NTRIP client
- 27 APS-NR2 Configured for RTK
- 28 Configuring the output
- 28 Connect Bluetooth
- 29 Configure the NMEA for Bluetooth output