Composite Measurement. TSI Quest Quest Environmental Monitor EVM Series, EVM-7

80 Composite Measurement

Composite Screens

Composite Measurement

When you first access the composite screen, all of the sensors appear on the screen. There are two main views which is dependent on if you pressed the zoomed-in or zoomed-out soft key. (The “zoomedout” is the default composite view.)

Composite Screens

+

–

Zoomed in: The composite measurement screen (when zoomed- in) combines all sensors/parameters into one screen with two columns displaying two different measurement calculations. The second column is changeable by pressing Enter

(See “B” below.)

.

Zoomed out: The composite measurement screen (when zoomed-out), appears with the measurements for all installed sensors. Press Enter

to change the measurement values (as explained in Table 5-3). Press ▲ / ▼ Arrows or Enter

to page through sensors. (See “A” below.)

A- Zoomed -out (Magnify soft key) B – Zoomed-in (Magnify soft key)

Figure 5-10: Composite measurement screen

 To change the composite measurements/view

1.

Press the Select soft key, Trend soft key, or the Detail soft key (see “Viewing summary/details” or

“Viewing trend data” for more details).

2.

To zoom in on the results, press the Magnify soft key (see “B”).

EVM Series User Manual